T.E.S IT-SOLUTIONS
Cart
MCP7H50-V02A

NVIDIA Mellanox

NVIDIA Mellanox MCP7H50-V02A 200Gb/s QSFP56 to 2x100Gb/s Splitter DAC Cable 2.5m

Part no.MCP7H50-V02A

€250.00

In stockCondition: New

Request a quote

Checkout runs on the secure Wix checkout page.

Form Factor
QSFP56 to 2x QSFP56 (Y-splitter)
Data Rate
200Gb/s split into 2x 100Gb/s
Cable Type
Passive Copper DAC (Hybrid Splitter)
Length
2.5m (fixed)

How this unit is built

Received, catalogued and inspected, and checked before it ships.

See the production flow

Description

NVIDIA Mellanox MCP7H50-V02A 200Gb/s QSFP56 Passive Copper Hybrid Splitter Cable, 2.5m: This is a 2.5-meter passive copper Direct Attach Cable (DAC) that splits one 200Gb/s QSFP56 port into two independent 100Gb/s QSFP56 connections. The V02A variant uses 26AWG conductors to support its 2.5m reach. There is no FEC retimer, no electronics, and no power draw. This is not a transceiver, not an Active Optical Cable, and not an active electrical cable. This is a new, factory-sealed unit.

Engineering Context

The MCP7H50 family bridges the HDR/200GbE generation to two HDR100 / 100GbE endpoints, doubling effective port density on the 200Gb/s side. The 200Gb/s QSFP56 end carries 4 lanes of 50Gb/s PAM4 signaling. Each 100Gb/s QSFP56 end carries 2 lanes of 50Gb/s PAM4 (HDR100). At 2.5m, the heavier 26AWG conductors are used to maintain signal integrity over the full passive run. The cable adds no end-to-end latency beyond propagation delay, draws 0W, and contains no diagnostic firmware. The V02A differs from the H02A primarily by jacket compound; both share the same 26AWG / 2.5m electrical reach.

Deployment & Use Cases

In-rack and short adjacent-rack fan-out from a 200GbE Spectrum-2 / SN3700 switch port to two ConnectX-5 or ConnectX-6 100GbE adapter ports. Doubling 200G port utilization in HDR100 / 100GbE deployments. HPC, AI training, and high-bandwidth storage clusters where 1.5m is too short and active optics are unnecessary at this distance.

Technical Specifications

  • OEM: NVIDIA Mellanox
  • Part Number: MCP7H50-V02A
  • Form Factor: QSFP56 to 2x QSFP56 (Y-splitter)
  • Data Rate: 200Gb/s split into 2x 100Gb/s
  • Cable Type: Passive Copper DAC (Hybrid Splitter)
  • Length: 2.5m (fixed)
  • Conductor Gauge: 26AWG
  • Power Draw: 0W (fully passive)
  • Condition: New — Factory-sealed

Compatibility & Hard Constraints

Designed for the NVIDIA Quantum HDR and Spectrum-2 family on the 200Gb/s end, paired with ConnectX-5 or ConnectX-6 adapters in HDR100 / 100GbE mode on the breakout ends. The 200Gb/s and 100Gb/s ends are not interchangeable. Not compatible with EDR-only ports that lack splitter support. Does not break out to SFP28 or QSFP28 form factors — both ends are QSFP56. Length is fixed at 2.5m and cannot be extended; for runs longer than 3m an Active Optical Cable variant should be used instead.

Frequently Asked Questions (FAQ)

Q. What is the Data Rate of the MCP7H50-V02A?
The data rate of the MCP7H50-V02A is 200Gb/s.

Q. Is the MCP7H50-V02A supplied new or refurbished, and who supplies it?
The MCP7H50-V02A is supplied new by T.E.S IT-SOLUTIONS, lab-tested before dispatch and shipped from EU stock with 1-3 business day handling. Full listing and current pricing at tes-itsolutions.com.

Why Choose T.E.S IT-SOLUTIONS

T.E.S IT-SOLUTIONS supplies new, factory-sealed NVIDIA Mellanox passive cabling with global shipping and a 1–3 day handling window. Visit tes-itsolutions.com for fabric design consultation and full inventory.