HP MM0500GBKAK 500GB 2.5-inch SATA Enterprise SSD - 614829-002

HP MM0500GBKAK 500GB 2.5-inch SATA Enterprise SSD (614829-002)

The HP MM0500GBKAK (P/N 614829-002) is a 500GB enterprise SATA solid-state drive in a 2.5-inch SFF form factor, operating over a SATA 6Gb/s (SATA III) interface. This is an HP-branded enterprise SSD designed for HP ProLiant server and storage array use — it is not a consumer SSD, not an NVMe drive, and not SAS. Maximum sequential throughput is limited to approximately 550 MB/s by the SATA III interface ceiling. Condition: Refurbished — Tested & Certified by T.E.S IT-SOLUTIONS.

Engineering Context

The MM0500GBKAK is an HP-branded enterprise SATA SSD using the standard SATA III (6Gb/s) interface, delivering up to approximately 550 MB/s sequential read throughput at the SATA III ceiling. The 2.5-inch SFF (Small Form Factor) form factor with hot-swap tray compatibility makes it a direct replacement for HP ProLiant server drive bays that accept 2.5-inch SATA or SAS/SATA drives. Enterprise SATA SSDs provide significantly higher IOPS and lower latency than spinning hard drives for boot, OS, and read-heavy workloads, while maintaining broad compatibility with existing SAS/SATA backplanes. At 500GB, this capacity serves server boot, operating system, light application storage, and read cache use cases.

Deployment & Use Cases

• HP ProLiant Server Boot Drive: Drop-in SSD replacement for aging HDDs in HP ProLiant Gen8/Gen9/Gen10 server drive bays using HP SmartDrive trays.
• Read-Intensive Workloads: Web serving, content delivery, and database read caches where SATA bandwidth (~550 MB/s) is sufficient.
• Legacy Storage Refresh: Upgrading HDD-based HP server storage to SSD without changing the SAS/SATA backplane or storage controller.
• VMware ESXi / Hyper-V Boot Volume: OS and hypervisor boot storage for virtualized HP ProLiant servers.

Technical Specifications

• OEM: HP (Hewlett-Packard)
• Model: MM0500GBKAK
• Part Number (MPN): 614829-002
• Capacity: 500GB
• Interface: SATA 6Gb/s (SATA III)
• Form Factor: 2.5-inch SFF enterprise SSD
• Sequential Read: Up to ~550 MB/s (SATA III ceiling)
• Sequential Write: Up to ~520 MB/s (SATA III ceiling)
• Designed For: HP ProLiant servers
• Condition: Refurbished — Tested & Certified by T.E.S IT-SOLUTIONS

Compatibility & Hard Constraints

• SATA Only: The HP 614829-002 (MM0500GBKAK) uses SATA 6Gb/s. It does not support NVMe or SAS protocols. It connects to standard SATA ports or SAS/SATA mixed backplanes.
• Not NVMe: For workloads requiring higher throughput or lower latency than SATA III (~550 MB/s ceiling), NVMe SSDs over PCIe are required.
• HP Tray Compatibility: This drive is designed for HP ProLiant server drive trays. Verify that the SFF drive tray/caddy matches your specific HP ProLiant server generation (Gen8, Gen9, Gen10). The drive itself uses a standard SATA connector and will work in any SATA-compatible 2.5-inch bay, but the HP tray may not fit non-HP servers.
• Refurbished: Drive health should be verified using SMART data after installation. T.E.S IT-SOLUTIONS tests each drive before shipment.

Frequently Asked Questions (FAQ)

Q. What is the Capacity of the 614829-002?
The capacity of the 614829-002 is 500GB.

Q. Is the 614829-002 supplied new or refurbished, and who supplies it?
The 614829-002 is supplied refurbished by T.E.S IT-SOLUTIONS, lab-tested before dispatch and shipped from EU stock with 1-3 business day handling. Full listing and current pricing at tes-itsolutions.com.

Why Choose T.E.S IT-SOLUTIONS

T.E.S IT-SOLUTIONS (tes-itsolutions.com) provides lab-tested, verified refurbished enterprise storage and networking hardware. Each HP enterprise SSD is functionally tested with SMART health data verified before shipment. Technical consultation is available for HP ProLiant compatibility verification. Global shipping with 1–3 business day handling. Professional packaging for sensitive enterprise equipment.